Journal Articles (*indicates in preparation or review)
30. *Poblete, E.S., Murray, C.D., Feys, D. “Development of Novel Self-Consolidating Concrete with Rapid-Setting Belitic Calcium Sulfoaluminate Cement (SCC BCSA)” In preparation for ASCE Journal of Materials.
29. * Munoz, J., et al., “Round Robin Test on TFHRC ASR Susceptibility Test (T FAST): AASHTO TP 144-23.” In review for ASTM Journal of Testing and Evaluation.
28. *Poblete, E.S., Murray, C.D., “Rapid Structural Repair Using Novel Self-Consolidating Belitic Calcium Sulfoaluminate Cement (BCSA SCC),” In second review for ASCE Journal of Structural Engineering.
27. Johnson, G.R., Poblete, E.S., and Murray, C.D., “Stress-Strain Response of Concrete Made With Belitic Calcium Sulfoaluminate Cement.” Accepted for ACI Structural Journal.
26. Dillard, R.J., Zhang, S., Murray, C.D., “Effects of Magnesium Phosphate Cement Proportions on Paste Properties,” Accepted for Magazine of Concrete Research.
25. Farivar, B., Ghasemi, B., Yusefian, K., and Murray, C.D., "On the rigidity of welded shear tab connections: Application of Machine Learning Techniques." Steel Construction 17 (2024).
24. Puttbach, C., Prinz, G.S., Murray, C.D., “Estimation of Cement Paste and UHPC Elastic Modulus through Measured Phase-Property Upscaling.” Cement 17 (2024).
23. Heymsfield, E., Murray, C.D., Salah, S., Benitez Ortiz, F., “Evaluating the Continuous Deck Placement Sequence Approach at Steel Bridges Using a Time-Dependent Numerical Analysis.” Journal of Performance of Constructed Facilities 38, no. 5 (2024).
22. Puttbach, C., Prinz, G.S., and Murray, C.D., “Strength and Stiffness Characterization of Ultra High-Performance Concrete (UHPC) Cement Paste Phases Through In-Situ Micro-Mechanical Testing.” Cement and Concrete Composites 149 (2024).
21. Aguilar, I., Soriano, E.O., and Murray, C.D. “Effect of Citric Acid on Slump, Compressive Strength, and Setting Time of Belitic Calcium Sulfoaluminate Concrete.” Magazine of Concrete Research. Published online (2023).
20. Puttbach, C., Prinz, G.S., Murray, C.D. “A Review of Existing Equations for Estimating Elastic Modulus in Specialty Concretes” ASCE Journal of Materials in Civil Engineering 35, no. 6 (2023).
19. Chesnut, C.W. and Murray, C.D. “Shear Capacity of Reinforced Concrete made with BCSA Cement.” ACI Structural Journal 120, no. 1 (2023).
18. Almohammedi, A., Dang, C.N., Murray, C.D., and Hale, W.M., “Enhanced Camber and Deflection Estimation for AASHTO Prestressed Concrete Girders.” PCI Journal 67, no. 6 (2022)
17. Ortega Gonzalez, A.J., Barry, M.L., Murray, C.D. “Development of Underwater Mortar Using Belitic Calcium Sulfoaluminate Cement.” Advances in Civil Engineering Materials 11, no. 1 (2022).
16. Dillard, R.J., Murray, C.D., Deschenes, R.A. “Belitic calcium sulfoaluminate cement subjected to sulfate attack and sulfuric acid.” Construction and Building Materials 343, (2022).
15. Almohammedi, A., Murray, C.D., Dang, C.N., and Hale, W.M., “Practical ultra-high-strength concrete for precast concrete applications.” PCI Journal 67, no.3 (2022).
14. Poblete, E.S., Messadi, T., Murray, C.D., and Zelinka, S. “Moisture Monitoring of a CLT Structure in a Southern Climate.” ASCE Journal of Architectural Engineering 28, no. 3 (2022)
13. Almohammedi, A., Dang, C.N., Murray, C.D., and Hale, W.M., “Investigation of measured prestress losses compared with design prestress losses in AASHTO Types II, III, IV, and VI bridge girders.” PCI Journal 66, no. 3 (2021).
12. Prinz, G.S., Murray, C.D., “On the Pullout Strength of Human Nasal Hair.” Materialia 16 (2021).
11. Khandel, O., Soliman, M., Floyd, R.W., and Murray, C.D., "Performance Assessment of Prestressed Concrete Bridge Girders using Fiber Optic Sensors and Artificial Neural Networks." Structure and Infrastructure Engineering. May (2020).
10. Cook, G.W., Murray, C.D., “Behavior of Reinforced Concrete Made with Belitic Calcium Sulfoaluminate Cement at Early Ages.” ACI Materials Journal 117, no. 1 (2020).
9. Bowser, T.M., Murray, C.D., Floyd, R.W., “Bond Behavior of 0.6 in. (15.2 mm) Prestressing Strand in Belitic Calcium Sulfoaluminate (BCSA) Cement Concrete.” ACI Structural Journal 117, no. 1 (2020).
8. Murray, C.D., Arancibia, M.D., Okumus, P., Floyd, R.W., “Destructive Testing and Computer Modeling of a Scale Prestressed Concrete I-Girder Bridge.” Engineering Structures 183C (2019): 195-205.
7. Murray, C.D., Floyd, R.W., Ramseyer, C.E., “Using Calcium Sulfoaluminate Cement for Prestressed, Precast Concrete Beams.” PCI Journal 64, no. 2 (2019).
6. Murray, C.D., Cranor, B.N., Floyd, R.W., Pei, J.S., “Experimental Testing of Older AASHTO Type-II Bridge Girders with Corrosion Damage at the Ends.” PCI Journal 64, no. 1 (2019).
5. Deschenes, R.A., Murray, C.D., Hale, W.M., “Mitigation of Alkali-Silica Reaction (ASR) and Freezing and Thawing in a Median Barrier Through Surface Treatment.” ACI Materials Journal 114, no. 02 (2017).
4. Murray, C.D., Deschenes, R.A., Hale, W.M., “Durability of Silane Sealer in a Highly Alkaline Environment.” ACI Materials Journal 113, no. 04 (2016).
3. Dang, C., Floyd, R.W., Murray, C.D., Hale, W.M., Martí-Vargas, J., “Bond Stress-Slip Model for 0.6 in. (15.2 mm) Diameter Strand.” ACI Structural Journal 112, no. 05 (2015).
2. Dang, C., Murray, C.D., Floyd, R.W., Hale, W.M., Martí-Vargas, J., “A Correlation of Strand Surface Quality to Transfer Length.” ACI Structural Journal 111, no. 05 (2014).
1. Dang, C., Murray, C.D., Floyd, R.W., Hale, W.M., and Vargas, J., "Analysis of bond stress distribution for prestressing strand by Standard Test for Strand Bond." Engineering Structures 72 (2014): 152-159.
Conference Papers
Peer Reviewed Conference Papers
6. Mayhorn, D.T., Murray, C.D., Floyd, R.W., and Prinz, G.S., “Effect of Corrosion on End Region Behavior of Pretensioned, Prestressed Bridge Girders,” PCI Convention and National Bridge Conference, Denver, CO, February, 2018.
5. Murray, C.D., Cranor, B.N., Floyd, R.W., and Pei, J.S., “Shear Behavior of 45-Year-Old AASHTO Type II Bridge Girders.” PCI Convention and National Bridge Conference No. 57. Cleveland, OH. March, 2017.
4. Deschenes, R. A., Jr., Murray, C.D., and Hale, W.M., "Prevention and Mitigation of ASR in Median Barriers with Varying Degrees of Damage." T&DI Congress 2014, pp. 111-120. Orlando, FL. June, 2014.
3. Dang, C., Murray, C.D., Floyd, R.W., and Hale, W.M., "A Correlation of Transfer Length and Strand End Slip." 10th fib International PhD Symposium in Civil Engineering. Quebec, Canada. July, 2014.
2. Dang, C., Murray, C.D., Floyd, R.W., Hale, W.M., and Vargas, J., “A Review of Factors Influencing Strand Bond.” PCI Convention and National Bridge Conference, Paper No. 91. Grapevine, TX. September, 2013.
1. Murray, C.D., Deschenes, Jr., R.W., Floyd, R.W., and Hale, W.M., “The Effect of Mortar Strength on the Standard Test for Strand Bond.” PCI Convention and National Bridge Conference, Paper No. 105. September, 2012. Nashville, TN.
Other Conference Papers
1. Murray, C.D., Floyd, R.W., “Shear and Anchorage Failure of Scale Prestressed Concrete I-Girders and Scale Bridge Section.” Structural Faults and Repair/European Bridge Conference. May 2018. Edinburgh, UK.